? copyright 2009 xilinx, inc. xilinx, the xilinx logo, virtex, sparta n, ise, and other designated brands included herein are tr ademarks of xilinx in the united states and other countries. all other trademarks are the property of their respective owners. xcn09032 (v1.0) november 30, 2009 www.xilinx.com 1 ds617, high-density configuration and storage device data sheet revision, v3.0 xcn09032 (v1.0) november 30, 2009 customer notification ? for your information overview the purpose of this notification is to communicate key revisions to ds617 , platform flash xl high-density configuration and storage device , v3.0, data sheet. the platform flash xl family includes the xcf128x device. there is no change to the form or fit of this device. there are no redu ctions to characterized functions of this device. description ds617, platform flash xl high-density configuration and storage device , data sheet has been revised to v3.0. the revision history section of the ds617 data sheet contains a det ailed list of revisions. important revisions are highlighted below: ? added notice of support for applicable virtex ? -6 fpgas. ? removed empty ac characteristic placeholders and refe rences to vddq operation in the 1.7v to 2.0v range. since none of the functions for vddq in the 1.7v to 2.0v r ange were ever characterize d, the empty placeholders and references to vddq operation in the 1.7v to 2.0v range are removed. ? improved synchronous read timing ac characteristic t khqv (clock high to output valid, max) from 17 ns to 16 ns based on re-analysis of characterization and test data that showed sufficient margin for an improved specification. products affected this notice applies to the platform flash xl device named in the ds617 data sheet. affected part numbers are included in table 1. table 1: affected product ordering codes platform flash xl family ordering codes xcf128xft64c XCF128XFTG64C key date this notification applies to the document ation revisions shown in table 2. table 2: key date document number document title document revision publication date ds617 platform flash xl high-density configuration and storage device v3.0 11/30/2009 response no response is required. for additional information or questions, please contact xilinx technical support . important notice : xilinx customer notifications (xcns, xd ns, and quality alerts) can be delivered via e-mail alerts sent by the mysupport website ( http://www.xilinx.com/support ). register today and personalize your ?myalerts? area to include customer notifications. xilinx mysupport provides many benefits, in cluding the ability to receive alerts for new and updated information about specific products , as well as alerts for other publications such as data sheets, errata, application notes, etc. for information on how to sign up, refer to xilinx answer record 18683 .
ds617, high-density configuration and storage device data sheet revision, v3.0 2 www.xilinx.com xcn09032 (v1.0) november 30, 2009 additional documentation ds617, platform flash xl high-density configuration and storage device , data sheet: http://www.xilinx.com/support/docum e ntation/data_sheets/ds617.pdf revision history the following table shows the revision history for this document. date version revision 11/30/09 1.0 initial release. notice of disclaimer the xilinx hardware fpga and cpld devices re ferred to herein (?products?) are subject to the terms and conditions of the xilinx limited warranty which can be viewed at http://www.xilinx.com/warranty.htm . this limited warranty does not extend to any use of products in an application or environment that is not within the specifications stated on the xilinx data sheet. all specifications are su bject to change without notice . products are not designed or intended to be fail-safe, or for use in any application re quiring fail-safe performance, such as lifesupport or safety devices or systems, or any other application that invokes the potential risks of death, personal injury or property or environmental damage (?critical applications?). use of products in critical applicatio ns is at the sole risk of customer, subject to applicable laws and regu lations. all specificat ions are subject to change without notice.
|
